1. Install wireless NVR
1-1.Device Connection
(1)Connect the mouse and monitor to the NVR host
(2)Connect the NVR to the router or switch
(3) Power on the NVR host and camera (please use the manufacturer’s power supply)
1-2. When the device is connected and powered on, After successful booting, the camera image will automatically be displayed on the monitor. (Default password: 888888）
Notice:
A: When the device leaves the factory, the camera and the wireless NVR host have been paired.
If you need to repair or add a new camera to the wireless NVR, Please refer to FAQ 3: Add a new camera to NVR.
B: The optimal wireless distance between the camera and NVR is within 30 meters.
C: The lower right corner of the display indicates a connection to the Internet； please check your network connection.
NVR Remote Access
Step 1. SriHome App Installation
Method 1: Scan the QR code to download “SriHome” App.
Method 2: Search“SriHome”on Google Play or iOS App Store.
Step 2. Register & Login SriHome App
Step 3. Add the Device to App
Note: For App remote access, the NVR must be connected to network.
FAQ
FAQ1: How To Share The Device With Other Users
The device supports multi-user viewing. Download the SriHome App to register an account, and then the administrator can share permissions to watch.
- Administrator operation: Administrator logs in to SriHome App, click Settings button->Visitor Management->Add->Select operator/visitor->Scan QR code New user App ID QR code (Figure 6) -> Remarks name -> Next step is completed (Figure 1-Figure 3)
- Authorized users: Return to the APP monitoring interface and scroll down to refresh to view the monitoring.
How do you find the user APP ID in the mobile app?
FAQ2: NVR hard disk installation
If the product you purchased does not come with a hard drive, please purchase a 3.5-inch hard drive by yourself (maximum support is 16T)
Note: Please do not connect the NVR to the power supply before installing the hard disk.
Install HDD for NVS001/NVS002
(1) Loosening the screws on the panel’s rear and side.
(2) Remove the cover from the NVR.
(3) Insert a hard drive with a SATA interface.
(4) Connect the data cable and power cable to HDD.
(5) Fasten the screws on the bottom to fix the HDD.
(6) Re-install the cover of the NVR and fasten screws.
Install HDD for NVS004
Install the hard disk with a cross screwdriver.
(1) Insert a SATA hard disk into the NVR hard disk interface.
(2) Tighten the screws to secure the hard drive.
FAQ3: How to add a new camera to Wireless NVR
Warning: When adding a device, do not delete the camera currently in use. After deletion, you need to pair it again.
Method 1: Scan the QR code to pair and add
30 seconds after the camera is powered on, it will emit continuous “beep” network configuration prompts. After hearing the prompts, follow the following steps:
(1). Click the icon in the lower left corner of the monitoring display.
(2). Click “Add” on the right side of the device list and select “QR Code”
(3). Aim the camera lens at the QR code and keep a distance of 20-60cm. After the camera recognizes the QR code, the camera will make a “ding” sound, indicating that pairing is in progress. Wait about 10 seconds and hear the second beep to indicate successful pairing.
(Note: Do not close the QR Code window otherwise the camera pairing will be unsuccessful)
Note: If the camera does not emit continuous “beep” network configuration prompts 30 seconds after the camera is powered on, please press and hold the camera’s “Reset” button for 5 seconds until you hear a long beep to restore factory settings. Then follow the above steps to re-add the device.
Method 2: Search and add
It supports adding SriHome IP cameras with RJ45 Netports below 5MP. First, connect the camera and NVR to the same local network, select “Search” -> Double-click the camera that needs to be added to the available device list-> Enter the camera password (default password: 888888), click Add and confirm.
FAQ4: SriHome APP access prompts no permission
Click the main menu in the lower left corner > Device Maintenance > Restore > Select “Others” > Click OK to restore.
FAQ5: Retrieve Password
Login panel > Forgot password > Click Retrieve password > Check the recovery key on your bound email account > Enter the key number, and your password will be displayed on the login panel.
